1.80GHz (High end frequency limit)The Tektronix 496 provides high performance spectrum analysis and measurements in the 1 kHz to 1.8 GHz range.Its high stability and 80 dB dynamic range meet your demands for proof-of-performance measurements, on site or on the bench.
Resolution bandwidth can be varied from 1 MHz to 30 Hz over the entire frequency range. Automatic phase lock stabilization reduces incidental FM to 10 Hz p-p; phase noise sidebands are at least -75dBc at 30 times the resolution bandwidth offset.
Frequency drift with phase lock is typically 1 kHz in ten minutes after 30-minute warm-up. The 496 provides 1 kHz frequency resolution in Delta-F mode.
- 50 Ohm/75 Ohm Selectable Inputs
- 1 kHz to 1800 MHz Coverage
- Amplitude comparison in 0.25 dB steps
- 1 kHz frequency resolution in delta-F mode
- Fully calibrated amplitude in dBm or dBmV The 496 provides high performance spectrum analysis and measurements in the 1 kHz to 1.8 GHz range.Its high stability and 80 dB dynamic range meet your demands for proof-of-performance measurements, on site or on the bench.
- Resolution bandwidth can be varied from 1 MHz to 30 Hz over the entire frequency range. Automatic phase lock stabilization reduces incidental FM to 10 Hz p-p; phase noise sidebands are at least -75dBc at 30 times the resolution bandwidth offset. Frequency drift with phase lock is typically 1 kHz in ten minutes after 30-minute warm-up. And the 496 provides 1 kHz frequency resolution in Delta-F mode
- 80 dB Dynamic Range
Specifications
High end frequency limit
1.80GHz
Resolution Bandwidth Max.
1MHz
Resolution Bandwidth Min.
30Hz
More Details
Portable Spectrum Analyzer
