3.00GHz (Frequency Range - High)The Model
15S1G3 is a solid state, self-contained, air-cooled, broadband amplifier designed applications where instantaneous bandwidth, high gain and linearity are required. Housed in a contemporary cabinet, the unit is designed for benchtop use, but can be removed from the cabinet immediate equipment rack mounting. The 15S1G3, when used with a sweep generator, will provide a minimum of 15 watts of RF power. Included is a front panel gain control which permits the operator to conveniently set the desired output level. The 15S1G3 is protected from RF input overdrive by an RF input leveling circuit which controls the RF input level to the RF amplifier first stage when the RF input level is increased above 0 dBm. The RF amplifier stages are protected from over-temperature by removing the DC voltage to them if an over-temperature condition occurs due to cooling blockage or fan failure. There is a digital display on the front panel to indicate the operate status and fault conditions if an over-temperature or power supply fault has occurred. The low level of spurious signals and linearity of the Model 15S1G3 make it ideal for use as a driver amplifier in testing wireless and communication components and subsystems. It can be used as a test instrument covering multiple frequency bands and is suitable for a variety of communication technologies such as CDMA, W-CDMA, TDMA, GSM etc. It is also suitable for EMC Test applications where undistorted modulation envelopes are desired.
Specifications
Frequency Range - High
3.00GHz
More Details
Microwave amplifier 15 Watt CW, .8-3.0 GHz
