TagLine Here


8712ET - Keysight / Agilent / HP Network Analyzers

Get a Quick Quote










Call for Price

8712ET - Keysight / Agilent / HP Network Analyzers


1.30GHz (High end frequency limit)

The Agilent 8712ET features a built-in transmission/reflection test set with a full range of magnitude and phase measurements. Two independent channels can measure and display two device parameters, such as transmission and reflection response, in a variety of formats including complex impedance, SWR, and delay, on rectangular, polar or Smith-chart displays. These analyzers also employ vector-error-correction techniques to enhance measurement accuracy.

For a wider range of output power levels to test active devices and components, Option 1E1 adds a 60-dB step attenuator as a standard feature, which extends the lowest power-level setting to -60 dBm. Both 50-ohm and 75-ohm versions are available.

Agilent Technologies RF economy network analyzers deliver the best combination of speed, accuracy, productivity features, and low cost. These analyzers help reduce tune and test times, increase throughput, and lower your overall cost per component. They offer all the critical performance and features needed to test typical RF components such as: • Filters • Amplifiers • Antennas • Cables • Mixers • CATV taps and distribution amplifiers

The 1.3 GHz 8712ET and ES models and the 3 GHz 8714ET and ES models are available in both 50-ohm and 75-ohm versions. With the addition of S-parameter measurement capability, the Agilent RF economy network analyzer family has evolved to meet today’s test demands of higher-performance components. This capability brings new levels of accuracy, convenience, and affordability for testing RF components.

S-parameter network analyzers let you measure the forward and reverse characteristics of your components without having to disconnect, turn around, and reconnect them to the analyzer. They also provide full two-port calibration to give you the best measurement accuracy possible. Depending upon your application, you can choose the optimum performance level of an S-parameter analyzer (ES models) or the lower cost of a transmission/reflection analyzer (ET models).

All models are loaded with powerful features including:

  • Synthesized source
  • High-dynamic-range narrowband and broadband receivers
  • Advanced vector-error correction 
  • Large display
  • Internal disk drive
  • Instrument BASIC (IBASIC) 
  • LAN capability

With both frequency and power sweeps, Agilent RF economy network analyzers let you quickly and accurately characterize the linear and nonlinear performance of your RF components.

Measurement capabilities :

  • Gain/Insertion loss
  • Isolation 
  • Insertion phase
  • Electrical length 
  • Linear group delay 
  • Return loss 
  • SWR
  • Reflection coefficient
  • Impedance
  • Gain compression 
  • AM-to-PM conversion
  • Absolute power
  • S-parameters (ES models only)


Specifications
High end freq limit
Vector

Instrument Type
1.30GHz

0
n/a

More Details
RF Ttransmission/Reflection Network Analyzer

Amabile Electronic Test is an independent distributor and is not affiliated with the manufacturers of the products it sells except where expressly noted
otherwise. Any and all trademarks or logo rights associated with the manufacturer' names and products are owned by the respective manufacturers.
Copyright © 2024 Amabile Electronic Test. Powered by Zen Cart


Dawson Multimedia | Web Design Orlando..