5.000kV (Max. Output AC Voltage)The Guardian 6000 Plus Electrical Safety Analyzer performs AC and DC hipot (hypot), insulation resistance, ground bond (continuity) and leakage current measurements for a complete dielectric testing solution. A fully automated tester, the G6000 Plus performs both high voltage electrical safety tests including dielectric withstand and dielectric breakdown and high current ground bond tests in accordance with the requirements of UL 60950 and other product safety compliance standards.
- A complete electrical safety testing solution in a single instrument
- Simultaneous hipot and ground bond testing
- Fully automated tester for integration into a production environment
- High voltage/high current scanner options for multi-point testing
- Archive test setups, data and results with CaptivATE Automation Software
- AC Hipot: Programmable Voltage 50 to 5000VAC, Leakage Current to 40mA
- DC Hipot: Programmable Voltage 50 to 6000VDC, Leakage Current to 12mA
- Insulation Resistance: 100kΩ to 50GΩ, Test Voltage 50 to 1000VDC
- Ground Bond: Programmable Current to 30A, R Measurement to 510mΩ
- Twin Port – Simultaneous Hipot and Ground Bond Testing
- Open/Short Circuit Detection Mode
- Programmable Hi/Lo Limits for Pass/Fail Testing
- Ability to Perform Multiple Tests in Sequence
- Internal Storage and Recall of 100 Test Setups, 50 Steps Each
- Programmable Ramp, Dwell and Test Times
- Front Panel Lockout Prevents Changes to the Test Setup
- Automatic Offset to Zero Out Residual Current
- Fast Cutoff and Quick Discharge of Device Under Test
- RS-232 and I/O Interfaces Included Standard
- IEEE-488 and Printer Interfaces Optional
- Pause Mode Allows the Operator to Change Device Connection and Continue
- Built-In Operator Prompted Software Calibration Routine
- Front and Rear Panel Output Connections
- 40 Ground Bond Testing with Optional Transformer
- Multi-Point Testing with Optional Internal Scanner and/or External Scanners
- CaptivATE Automation Software for G6000 Plus; Optional
- CE, TUV Marked
Specifications
Max. Output AC Voltage
5.000kV
Max. Output DC Voltage
6.000kV
More Details
Guardian 6000 Plus Electrical Safety Analyzer (CE Mark)
