|
|
Displaying 1 to 10 (of 27 products)
| Product Image |
Item Name- |
Price |
 |
600.0MHz (Max. Freq.)
The Anritsu MF57A /58A and MF63A/64A are special frequency counters designed for a wide range of applications, in addition to ordinary frequency measurement with provision of the BURST position for measurement of intermittent frequencies and... |
|
|
600.0MHz (Max. Freq.)
Number of Channels 2 ch Minimum Frequency, Ch. 1 - 10 Hz Maximum Frequency, Ch. 1 - 60 MHz Sensitivity, Channel 1 - 10 mV Minimum Frequency, Ch. 2 -30 MHz Maximum Frequency, Ch. 2 - 600 MHz Time base stability 0.02 /yr Measurement... |
|
 |
350.0MHz (Max. Freq.)
The Agilent 53210A |
|
 |
350.0MHz (Max. Freq.)
The Agilent 53220A 350 MHz universal frequency counter/timer is a two-channel frequency counter with the ability to make all the frequency and time interval measurements you depend on. An optional microwave channel can be added to measure 6... |
|
 |
350.0MHz (Max. Freq.)
The Agilent 53230A universal frequency counter/timer serves all your frequency and time interval measurement needs. In addition to the typical frequency and time interval measurements, continuous/gap-free measurements are available for basic... |
|
|
500.0MHz (Max. Freq.)
The Agilent 5345A universal counter is a high-performance microwave and millimeter-wave pulse frequency counter. Operating from dc to 500 MHz, the counter also makes sub-microwave measurements including frequency, period, totalization,... |
|
|
500.0MHz (Max. Freq.)
Minimum Frequency, Ch. 1 125 mHz Maximum Frequency, Ch. 1 500 MHz Single-shot freq. res.: 10 dig Time interval resol: 150ps/1ps Max. cont: meas. rate: 13M Output meas/s: 20,000 Event timing graph Numeric display Hardware histogram... |
|
|
350.0MHz (Max. Freq.)
The DC5010 Frequency Counter Plug-In is an excellent choice for ATE systems. Makes frequency measurements to 350 MHzFunctions include: Reciprocal Frequency Measurement, Period, Width, Time from A to B, Events B during A, Totalize A, A+B,... |
|
 |
350.0MHz (Max. Freq.)
Frequency - 350 MHz on both A and B channels 3.125 ns single shot resolution 9 digit display 1 ps resolution with averaging and auto or selected averaging to 10 ^8 duty-cycle independent autotrigger DVM mode for displaying trigger... |
|
 |
250.0MHz (Max. Freq.)
7-Digit LED Display with OverRanging. Frequency 5Hz to 125 on Ch A, 5Hz to 250MHz on Ch B. Internal rechargeable batteries Sensitivity, Channel A 0.025 Vrms Sensitivity, Channel B 0.030 Vrms Time base stability 2 ppm Trigger Source Int/Ext... |
|
Displaying 1 to 10 (of 27 products)
|
Amabile Electronic Test is an independent distributor and is not affiliated with the manufacturers of the products it sells except where expressly noted
otherwise. Any and all trademarks or logo rights associated with the manufacturer' names and products are owned by the respective manufacturers.
