|
|
Displaying 1 to 10 (of 27 products)
| Product Image |
Item Name |
Price- |
 |
Agilent / Keysight 81642A Tunable Laser Source The Keysight 81642A tunable laser covers the C- and L- Band. It is optimized for testing optical amplifiers at high stimulus power, and passive components. This Keysight "A" Tunable Laser Source has been replaced by 81642B but can be upgraded. The... |
$8,998.43
|
 |
PCIE3 Serial,16 Differential Inputs,x8,Midbus Probe The P67SA00 Series probes provide validation engineers with a comprehensive set of PCI Express probing solutions, including midbus, slot interposer, and solder-down connectors. With support for PCI Express Gen3 channel lengths up to 24 in. with 2... |
$8,556.00
|
 |
The Agilent 86109A provides the widest bandwidth for measurements of very high-speed optical waveforms. The integrated, calibrated optical receiver allows for easy, precise analysis of optical signals. The flat frequency response provides low-distortion, high-fidelity measurements. An average power... |
$8,500.00
|
 |
17 Channel Differential Input Logic Probe The P6717A and P6780 logic probes break out 16 data channels and 1 clock/data channel over 2 flying lead sets (Group 1 and Group 2). Each lead set includes eight leads that have a positive signal input on one side and a negative input on the opposite side... |
$7,094.00
|
 |
Agilent/HP 83496A Optical / Electrical clock recovery module, 50 Mb/s – 7.1 Gb/s The 83496A multi-rate electrical Clock Recovery (CR) module performs clock extraction for waveform analysis with continuous, unbanded tuning from 50 Mb/s to 13.5 Gb/s, ultra-low residual jitter and Golden Phase Locked... |
$3,500.00
|
 |
The N4851B MIPI D-PHY acquisition probe and N4861B MIPI D-PHY stimulus probe enable users to perform real-time digital serial analysis and generate real-time digital serial stimulus of the MIPI D-PHY interface. Both probes support the CSI-2 (Camera Serial interface) and DSI (Display Serial... |
$2,750.00
|
 |
Agilent/HP 83486A 3 GHz optical / 20 GHz electrical module Key Features: 3 GHz optical channel for 62.5/125 fibers Wavelength range: 750-860 nm Reference receiver capability (0.155/0.622/1.066/1.250 Gb/s) 20 GHz electrical channel with 3.5 mm male input |
$2,000.00
|
 |
The AMIQ04 is a dual channel modulation generator engineered for use as an I/Q source for use with complex communication systems. It is programmed and set with WinIQSIM or can be operated from an SMIQ series signal generator. Each channel of the AMIQ04 can store up to 16,000,000 samples. Sequences... |
$1,500.00
|
 |
Data Acquisition / Data Logger Switch Unit The Agilent 34970A Data Acquisition / Data Logger Switch Unit consists of a three-slot mainframe with a built-in 6 1/2 digit digital multimeter. Each channel can be configured independently to measure one of 11 different functions without the added cost or... |
$595.00
|
 |
20 Channel Multiplexer (2/4-wire) Module for 34970A/34972A The Agilent 34901A module for the 34970A/34972A Data Acquisition/Switch Unit is the most versatile multiplexer for general purpose scanning. It combines dense, multi-function switching with 60 channel/second scan rates to address a broad... |
|
Displaying 1 to 10 (of 27 products)
|
Amabile Electronic Test is an independent distributor and is not affiliated with the manufacturers of the products it sells except where expressly noted
otherwise. Any and all trademarks or logo rights associated with the manufacturer' names and products are owned by the respective manufacturers.
