|
Displaying 1 to 10 (of 27 products)
Product Image |
Item Name- |
Price |
|
PCIE3 Serial,16 Differential Inputs,x8,Midbus Probe The P67SA00 Series probes provide validation engineers with a comprehensive set of PCI Express probing solutions, including midbus, slot interposer, and solder-down connectors. With support for PCI Express Gen3 channel lengths up to 24 in. with 2... |
$8,556.00
|
|
17 Channel Differential Input Logic Probe The P6717A and P6780 logic probes break out 16 data channels and 1 clock/data channel over 2 flying lead sets (Group 1 and Group 2). Each lead set includes eight leads that have a positive signal input on one side and a negative input on the opposite side... |
$7,094.00
|
|
The N4851B MIPI D-PHY acquisition probe and N4861B MIPI D-PHY stimulus probe enable users to perform real-time digital serial analysis and generate real-time digital serial stimulus of the MIPI D-PHY interface. Both probes support the CSI-2 (Camera Serial interface) and DSI (Display Serial... |
$2,750.00
|
|
The AMIQ04 is a dual channel modulation generator engineered for use as an I/Q source for use with complex communication systems. It is programmed and set with WinIQSIM or can be operated from an SMIQ series signal generator. Each channel of the AMIQ04 can store up to 16,000,000 samples. Sequences... |
$1,500.00
|
|
The Agilent 86109A provides the widest bandwidth for measurements of very high-speed optical waveforms. The integrated, calibrated optical receiver allows for easy, precise analysis of optical signals. The flat frequency response provides low-distortion, high-fidelity measurements. An average power... |
$8,500.00
|
|
Agilent/HP 86105A 20 GHz optical / 20 GHz electrical module The Keysight 86105A incorporates two measurement channels -- one optical, the second electrical. Each channel has two selectable bandwidth settings. In the lower bandwidth mode of 12.4 GHz, oscilloscope noise performance is excellent,... |
|
|
The Agilent 86105A incorporates two measurement channels -- one optical, the second electrical. Each channel has two selectable bandwidth settings. In the lower bandwidth mode of 12.4 GHz, oscilloscope noise performance is excellent, while the 20 GHz mode allows greater fidelity for high-speed... |
|
|
Agilent/HP 86103A 2.8 GHz optical / 20 GHz electrical module The Keysight 86103A provides the ideal measurement system for testing SDH/SONET signals operating at 155 or 622 Mb/s or Fibre Channel 1063 Mb/s and Gigabit Ethernet 1250 Mb/s rates. The calibrated, integrated optical receiver, with over... |
|
|
The Agilent 85133F is a 63 cm (25 in) long flexible cable set composed of a 2.4 mm female to PSC-2.4 mm female connector and a 2.4 mm female to 2.4 mm male connector. Cable frequency range is DC to 50 GHz with a return loss of greater than or equal to 12.5 dB. Insertion loss is 0.48 * sqrt (f) +... |
|
|
The Agilent 85027E directional bridge is designed to operate with either the Agilent 8757 in ac or dc detection modes or with the Agilent 8756 or Agilent 8755 in ac detection mode. This bridge offers high directivity, excellent test port match, and a measurement range of up to 26.5 GHz in coax.... |
|
Displaying 1 to 10 (of 27 products)
|
Amabile Electronic Test is an independent distributor and is not affiliated with the manufacturers of the products it sells except where expressly noted
otherwise. Any and all trademarks or logo rights associated with the manufacturer' names and products are owned by the respective manufacturers.