|
|
Displaying 1 to 10 (of 18 products)
| Product Image |
Item Name+ |
Price |
 |
4.0MHz (High end frequency limit)
Voltage ranges: 1 mV FS to 300 V FS in 12 ranges of 1, 3, 10 sequence. 10 dB between ranges Frequency Range: Useable 5 Hz to 8 MHz Calibrated 10 Hz to 4 MHz Calibration: Responds to absolute average value of the applied... |
|
 |
25.0MHz (High end frequency limit)
The Ballantine 323 True RMS analog ac voltmeter uses advanced true rms circuitry to achieve square law response from rugged, fast responding silicon diode detectors with no thermal lag and overload vulnerability inherent in... |
|
 |
10.0MHz (High end frequency limit)
10 Hz to 10 MHz bandwidth Thermal RMS converter 1 mV sensitivity Accurate with high crest factor and complex waveforms Analog meter SpecificationsHigh end frequency limit10.0MHz Voltage Range High300 V Voltage Range Low1 mV More... |
|
 |
100.0MHz (High end frequency limit)
The model HP 3403C is usable from DC to 100 MHz.True rms is especially valuable for measurements of noise,multiplexed signals,modulated waves and signals with high harmonic content. Full range display of 10 mV (AC only), 100... |
|
|
10.0MHz (High end frequency limit)
Voltage range: 1 mV to 300 V F.S. 12 ranges Frequency range: 10 Hz - 10 MHz Input impedance: 10 MO on all ranges <25pF to <12 pF depending on ranges Overload 500 V rms AC 300 V DC SpecificationsHigh end frequency... |
|
 |
10.0MHz (High end frequency limit)
Voltage range: 1 mV to 300 V F.S. 12 ranges Frequency range: 10Hz - 10 MHz Input impedance: 10 MO on all ranges <25pF to <12 pF depending on ranges Overload 500 V rms AC 300 V DC SpecificationsHigh end... |
|
|
4.0MHz (High end frequency limit)
Voltage range: 1 mV to 300 V F.S. 14 ranges Frequency range: 20 Hz - 4 MHz Input impedance: 10 MO on all ranges <30pF to <15 pF depending on ranges Overload 500 V rms AC 300 V DC SpecificationsHigh end frequency... |
|
 |
4.0MHz (High end frequency limit)
Voltage range: 1 mV to 300 V F.S. 14 ranges Frequency range: 20 Hz - 4 MHz Input impedance: 10 MO on all ranges <30pF to <15 pF depending on ranges Overload 500 V rms AC 300 V DC SpecificationsHigh end frequency... |
|
 |
4.0MHz (High end frequency limit)
dB ranges from -100 dB to +60 dB in 8 ranges 20 Hz to 4 MHz wide frequency range Input impedance: 10 MΩ on all ranges (<30pF to <15pF depending on range) ▪ ± 0.4 dB typical accuracy 1200 V rms, 1000 V... |
|
 |
20.0MHz (High end frequency limit)
The Fluke 8920A is a wideband digital voltmeter with true rms ac with read-out in volts or dB and has a frequency range of 2 Hz to 20 MHz. The monolithic thermal converter within the 8920A provides wideband, low-noise, and... |
|
Displaying 1 to 10 (of 18 products)
|
Amabile Electronic Test is an independent distributor and is not affiliated with the manufacturers of the products it sells except where expressly noted
otherwise. Any and all trademarks or logo rights associated with the manufacturer' names and products are owned by the respective manufacturers.
